这是文章最后一次更新,加入了TLB与Cache信息等资料
前言:论坛上面有人不明白CPUID指令的用法,于是就萌生写这篇文章的想法,
若有错误话请大侠指出,谢谢了 ^^
论坛的式样貌似有问题,若式样问题导致阅读问题的话,可以在文章尾下载txt文档阅读.
论坛上面有人不明白CPUID指令的用法,于是就萌生写这篇文章的想法,
若有错误话请大侠指出,谢谢了 ^^
CPUID是Intel Pentium以上级CPU内置的一个指令(486级及以下的CPU不支持),它用于识别某一类型的CPU,它能返回CPU的级别(family),型号(model),CPU步进(Stepping ID)及CPU字串等信息,从此命令也可以得到CPU的缓存与TLB信息.
CPUID返回数据类型是在EAX寄存器里面定义的,而指令返回的数值则在存储在EAX,EBX,ECX和EDX寄存器里面.
返回的信息分两部分:基本信息与扩展信息.在EAX输入0-3参数时,它返回的CPU的基本信息;而在EAX输入0x8000000至0x800000x时,它返回的是CPU的扩展信息(extended function information).扩展信息只包含在Pentium 4及以后的CPU上,Pentium 4以前的CPU无法取得它的扩展信息.
如下面的表:
CPU级别 基本信息 扩展信息
486及以前的CPU 不可用 不可用
Pentium 0x1 不可用
Pentium Pro,Pentium 2 0x2 不可用
Pentium 3 0x3 不可用
Pentium 4 0x2 0x80000004
Xeon(至强) 0x2 0x80000004
假若输入高于该处理器的值时,CPUID指令返回的是该CPU的输入最高值的返回值(这一句不知道怎么说才好),
比如在在Pentium 4上输入0x4,则CPU返回值与输入0x2的返回值一样.
下面的表是输入值与返回值的关系:
输入值 返回值
-----------------------------------------------------------------
0x0 EAX CPU基本参数的输入值
EBX "Genu"
ECX "Intel"
EDX "inel"
------------------------------------------------------------------
0x1 EAX CPU的级别,型号及步进
EBX 信息很多,下面介绍
ECX 保留
EDX 特征信息(Feature Information)
------------------------------------------------------------------
0x2 EAX到EDX返回的都是缓存和TLB的信息
------------------------------------------------------------------
0x3 EAX 保留
EBX 保留
ECX CPU序列号(0 - 31bit) (只是在Pentium 3中才有效)
EDX CPU序列号(32 - 63bit) (只是在Pentium 3 中才有效)
------------------------------------------------------------------
0x80000000 EAX 扩展信息输入数最大值(具有扩展信息的CPU才能返回)
EBX 保留
ECX 保留
EDX 保留
------------------------------------------------------------------
0x80000001 EAX CPU特征(Signature)和扩展特征位(Extended Feature Bits)
EBX 到 ECX 保留
------------------------------------------------------------------
0x80000002 EAX 处理器字串(Processor Brand String)
EBX 处理器字串(续)
ECX 处理器字串(续)
EDX 处理器字串(续)
------------------------------------------------------------------
0x80000003 EAX 处理器字串(续)
EBX 处理器字串(续)
ECX 处理器字串(续)
EDX 处理器字串(续)
------------------------------------------------------------------
0x80000004 EAX 处理器字串(续)
EBX 处理器字串(续)
ECX 处理器字串(续)
EDX 处理器字串(续)
------------------------------------------------------------------
当输入0x1时,EBX返回值是:
第 0 - 7位: CPU字串索引 (Brand Index)
第 8 - 15位: CLFLUSH线大小(CLFLUSH line size) (返回值*8 = cache line size)
第16 - 23位: 保留
第24 - 31位: 处理器APIC物理标号 (Processor local APIC physical ID)
当输入0x1时,EDX返回的扩展信息解释如下:
位 标号 解释
0 FPU Floating Point Unit On-Chip. CPU是否内置浮点计算单元
1 VME Virtual 8086 Mode Enhancements. 是否支持虚拟8086模式
2 DE Debugging Extensions. 是否支持调试功能.
3 PSE Page Size Extension. 是否支持大于4MB的分页.
4 TSC Time Stamp Counter. 是否支持RDTSC指令.(注:RDTSC指令可以计算出CPU的频率)
5 MSR Module Specific Registers RDMSR and WRMSR Instructions. 是否支持RDMSR与WRMSR (*注1)
6 PAE Physical Address Extension. 是否支持大于32bit的物理地址.
7 MCE Machine Check Exception. (*注2)
8 CX8 CMPXCHG8B Instruction. 是否支持8bytes(64bit)数的比较与交换指令.
9 APIC APIC On-Chip.是否支持APIC(Advanced Programmable Interrupt Controller)
10 保留
11 SEP SYSENTER and SYSEXIT Instructions.是否支持SYSENTER与SYSEXIT指令.(*注3)
12 MTRR Memory Type Range Registers. 是否支持MTTR(*注4)
13 PGE PTE Global Bit. 是否支持全局页面目录入口标志位 (global bit in page directory entries)
14 MCA Machine Check Architecture. 是否支持MCA,MCA是Pentium4,Xeon,P6级处理器的一个错误报告机制
15 CMOV Conditional Move Instructions. CMOV指令是否可用.(请问谁可以解释一下CMOV是什么命令?)
16 PAT Page Attribute Table. 是否支持PAT,PAT允许操作系统指定4K大小的线性内存空间
17 PSE-36 32-bit Page Size Extension. 是否支持4GB的扩展内存
18 PSN Processor Serial Number. 是否支持处理器序列号.(P3有效)
19 CLFSH CLFLUSH Instruction.是否支持CLFLUSH.(*注5)
20 保留
21 DS Debug Store. 是否支持把调试信息写入缓存,
22 ACPI ACPI Processor Performance Modulation Registers. 处理器使用特别的寄存器以允许软件控制处理器的运行周期.
23 MMX Inter MMX Technology.是否支持MMX
24 FXSR FXSAVE and FXRSTOR Instructions. FXSAVE与FXRSTOR指令是否可用(*注6)
25 SSE SSE.是否支持SSE.
26 SSE2 是否支持SSE2.
27 SS Self Snoop. 处理器是否支持总线监视,以防止储存器冲突.
28 保留
29 TM Thermal Monitor.CPU是否支持温度控制.
30 & 31 保留
--------------------------------------------------------------
注1: RDMSR: Load MSR specified by ECX into EDX:EAX
WRMSR: Write the value in EDX:EAX to MSR specified by ECX
注2:
原文是Exception 18 is defined for Machine Checks,including CR4.MCE for controlling the feature. This feature does not define themodel-specific implementations of machine-check error logging, reporting, andprocessor shutdowns. Machine Check exception handlers may have to depend onprocessor version to do model specific processing of the exception, or test for thepresence of the Machine Check feature.
注3: SYSENTER: Fast call to privilege level 0 system procedures
SYSEXIT: Fast return to privilege level 3 user code.
注4:
原文是The MTRRcap MSR contains feature bits that describe what memory types are supported, how manyvariable MTRRs are supported, and whether fixed MTRRs are supported.
注5: CLFLUSH: Flushes cache line containing m8.
注6: FXSAVE: Save the x87 FPU, MMX, XMM, and MXCSR register
FXSTOR: Restore the x87 FPU, MMX, XMM, and MXCSR register
按照这个,就可以自己写一个CPU检测程序了;
#include <stdio.h>
void main()
{
unsigned long DBaseIndex, DFeInfo, DFeInfo2, DCPUBaseInfo;
unsigned long DFeIndex, DCPUExInfo, i;
unsigned long DOther[4], DTLB[4], DProceSN[2];
char cCom[13];
char cProStr[49];
unsigned int j;
_asm
{
xor eax, eax
cpuid
mov DBaseIndex ,eax
mov dword ptr cCom ,ebx
mov dword ptr cCom+4 ,ecx //AMD CPU要把ecx改为edx
mov dword ptr cCom+8 ,edx //AMD CPU要把edx改为ecx
mov eax, 1
cpuid
mov DCPUBaseInfo, eax
mov DFeInfo, ebx
mov DFeInfo2, edx
mov eax, 0x80000000
cpuid
mov DFeIndex, eax
mov eax, 0x80000001
cpuid
mov DCPUExInfo, eax
mov eax, 0x80000002
cpuid
mov dword ptr cProStr , eax
mov dword ptr cProStr + 4 , ebx
mov dword ptr cProStr + 8 , ecx
mov dword ptr cProStr + 12 ,edx
mov eax, 0x80000003
cpuid
mov dword ptr cProStr + 16 , eax
mov dword ptr cProStr + 20 , ebx
mov dword ptr cProStr + 24 , ecx
mov dword ptr cProStr + 28 , edx
mov eax, 0x80000004
cpuid
mov dword ptr cProStr + 32 , eax
mov dword ptr cProStr + 36 , ebx
mov dword ptr cProStr + 40 , ecx
mov dword ptr cProStr + 44 , edx
}
if( DBaseIndex >= 2 )
{
_asm
{
mov eax, 2
cpuid
mov DTLB[0], eax
mov DTLB[2], ebx
mov DTLB[3], ecx
mov DTLB[4], edx
}
}
if(DBaseIndex == 3)
{
_asm
{
mov eax, 3
cpuid
mov DProceSN[0], ecx
mov DProceSN[1], edx
}
}
cCom[12] = '\0'; //加一个结尾符
printf( "CPU厂商: %s\n", cCom );
printf( "CPU字串: %s\n", cProStr );
printf( "CPU基本参数: Family:%X Model:%X Stepping ID:%X\n", (DCPUBaseInfo & 0x0F00) >> 8,
(DCPUBaseInfo & 0xF0) >> 4, DCPUBaseInfo & 0xF );
printf( "CPU扩展参数: Family:%X Model:%X Stepping ID:%X\n", (DCPUExInfo & 0x0F00) >> 8,
(DCPUExInfo & 0xF0) >> 4, DCPUExInfo & 0xF );
printf( "CPU字串索引: 0x%X\n", DFeInfo & 0xFF );
printf( "CLFLUSH线大小: 0x%X\n", ( DFeInfo & 0xFF00 ) >> 8 );
printf ( "处理器APIC物理标号:0x%X\n", ( DFeInfo & 0xF000 ) >> 24 );
if( DBaseIndex >= 2)
{
printf( "CPU Cache & TLB Information: " );
for(j = 0; j < 4; j++)
{
if( !(DTLB[j] & 0xFF) ) printf( "%.2X ", DTLB[j] & 0xFF );
if( !((DTLB[j] & 0xFF) >> 8) ) printf( "%.2X ", (DTLB[j] & 0xFF00) >> 8 );
if( !((DTLB[j] & 0xFF0000) >> 16) ) printf( "%.2X ",( DTLB[j] & 0xFF0000) >> 16);
if( !((DTLB[j] & 0xFF000000) >> 24) ) printf( "%.2X ",( DTLB[j] & 0xFF000000) >> 24);
}
printf("\n");
}
if( DBaseIndex == 3 )
{
printf( "CPU序列号是:%X%X\n", DProceSN[0], DProceSN[1] );
}
printf( "FPU: %d\t\t", DFeInfo2 & 0x00000001 ); //下面是调用某BLOG上面的代码,懒得写了 ^^
printf( "VME: %d\t\t", (DFeInfo2 & 0x00000002 ) >> 1 );
printf( "DE: %d\n", (DFeInfo2 & 0x00000004 ) >> 2 );
printf( "PSE: %d\t\t", (DFeInfo2 & 0x00000008 ) >> 3 );
printf( "TSC: %d\t\t", (DFeInfo2 & 0x00000010 ) >> 4 );
printf( "MSR: %d\n", (DFeInfo2 & 0x00000020 ) >> 5 );
printf( "PAE: %d\t\t", (DFeInfo2 & 0x00000040 ) >> 6 );
printf( "MCE: %d\t\t", (DFeInfo2 & 0x00000080 ) >> 7 );
printf( "CX8: %d\n", (DFeInfo2 & 0x00000100 ) >> 8 );
printf( "APIC: %d\t", (DFeInfo2 & 0x00000200 ) >> 9 );
printf( "SEP: %d\t\t", (DFeInfo2 & 0x00000800 ) >> 11 );
printf( "MTRR: %d\n", (DFeInfo2 & 0x00001000 ) >> 12 );
printf( "PGE: %d\t\t", (DFeInfo2 & 0x00002000 ) >> 13 );
printf( "MCA: %d\t\t", (DFeInfo2 & 0x00004000 ) >> 14 );
printf( "CMOV: %d\n", (DFeInfo2 & 0x00008000 ) >> 15 );
printf( "PAT: %d\t\t", (DFeInfo2 & 0x00010000 ) >> 16 );
printf( "PSE-36: %d\t", (DFeInfo2 & 0x00020000 ) >> 17 );
printf( "PSN: %d\n", (DFeInfo2 & 0x00040000 ) >> 18 );
printf( "CLFSN: %d\t", (DFeInfo2 & 0x00080000 ) >> 19 );
printf( "DS: %d\t\t", (DFeInfo2 & 0x00200000 ) >> 21 );
printf( "ACPI: %d\n", (DFeInfo2 & 0x00400000 ) >> 22 );
printf( "MMX: %d\t\t", (DFeInfo2 & 0x00800000 ) >> 23 );
printf( "FXSR: %d\t", (DFeInfo2 & 0x01000000 ) >> 24 );
printf( "SSE: %d\n", (DFeInfo2 & 0x02000000 ) >> 25 );
printf( "SSE2: %d\t", (DFeInfo2 & 0x04000000 ) >> 26 );
printf( "SS: %d\t\t", (DFeInfo2 & 0x08000000 ) >> 27 );
printf( "TM: %d\n", (DFeInfo2 & 0x20000000 ) >> 29 );
printf("\n其它信息:\n");
printf("----------------------------------------\n");
printf("In \t\tEAX \t\tEBX \t\tECX \t\tEDX");
for( i = 0x80000004; i <= DFeIndex; ++i )
{
DOther[0] = DOther[1] = DOther[2] = DOther[3] = 0;
_asm
{
mov eax, i
cpuid
mov DOther[0], eax
mov DOther[1], ebx
mov DOther[2], ecx
mov DOther[3], edx
}
printf( "\n0x%.8X\t0x%.8X\t0x%.8X\t0x%.8X\t0x%.8X", i, DOther[0], DOther[1], DOther[2], DOther[3] );
}
printf( "\n" );
system( "pause" );
}
TLB与Cache信息详解:
0x00 Null descriptor
0x01 Instruction TLB: 4K-Byte Pages, 4-way set associative, 32 entries
0x02 Instruction TLB: 4M-Byte Pages, 4-way set associative, 2 entries
0x03 Data TLB: 4K-Byte Pages, 4-way set associative, 64 entries
0x04 Data TLB: 4M-Byte Pages, 4-way set associative, 8 entries
0x06 1st-level instruction cache: 8K Bytes, 4-way set associative, 32 byte line size
0x08 1st-level instruction cache: 16K Bytes, 4-way set associative, 32 byte line size
0x0A 1st-level data cache: 8K Bytes, 2-way set associative, 32 byte line size
0x0C 1st-level data cache: 16K Bytes, 4-way set associative, 32 byte line size
0x22 3rd-level cache: 512K Bytes, 4-way set associative, 64 byte line size
0x23 3rd-level cache: 1M Bytes, 8-way set associative, 64 byte line size
0x25 3rd-level cache: 2M Bytes, 8-way set associative, 64 byte line size
0x29 3rd-level cache: 4M Bytes, 8-way set associative, 64 byte line size
0x40 No 2nd-level cache or, if processor contains a valid 2nd-level cache, no 3rd-level cache
0x41 2nd-level cache: 128K Bytes, 4-way set associative, 32 byte line size
0x42 2nd-level cache: 256K Bytes, 4-way set associative, 32 byte line size
0x43 2nd-level cache: 512K Bytes, 4-way set associative, 32 byte line size
0x44 2nd-level cache: 1M Byte, 4-way set associative, 32 byte line size
0x45 2nd-level cache: 2M Byte, 4-way set associative, 32 byte line size
0x50 Instruction TLB: 4-KByte and 2-MByte or 4-MByte pages, 64 entries
0x51 Instruction TLB: 4-KByte and 2-MByte or 4-MByte pages, 128 entries
0x52 Instruction TLB: 4-KByte and 2-MByte or 4-MByte pages, 256 entries
0x5B Data TLB: 4-KByte and 4-MByte pages, 64 entries
0x5C Data TLB: 4-KByte and 4-MByte pages,128 entries
0x5D Data TLB: 4-KByte and 4-MByte pages,256 entries
0x66 1st-level data cache: 8KB, 4-way set associative, 64 byte line size
0x67 1st-level data cache: 16KB, 4-way set associative, 64 byte line size
0x68 1st-level data cache: 32KB, 4-way set associative, 64 byte line size
0x70 Trace cache: 12K-μop, 8-way set associative
0x71 Trace cache: 16K-μop, 8-way set associative
0x72 Trace cache: 32K-μop, 8-way set associative
0x79 2nd-level cache: 128KB, 8-way set associative, sectored, 64 byte line size
0x7A 2nd-level cache: 256KB, 8-way set associative, sectored, 64 byte line size
0x7B 2nd-level cache: 512KB, 8-way set associative, sectored, 64 byte line size
0x7C 2nd-level cache: 1MB, 8-way set associative, sectored, 64 byte line size
0x82 2nd-level cache: 256K Bytes, 8-way set associative, 32 byte line size
0x84 2nd-level cache: 1M Byte, 8-way set associative, 32 byte line size
0x85 2nd-level cache: 2M Byte, 8-way set associative, 32 byte line size
举一个例子,一个CPU执行
mov eax, 2
cpuid
后,
返回值如下:
EAX 0x665B5001
EBX 0x0
ECX 0x0
EDX 0x007A7000
就代表了这个CPU的Cache信息是:
1. 0x66:1st-level data cache: 8KB, 4-way set associative, 64 byte line size
2. 0x5B:Data TLB: 4-KByte and 4-MByte pages, 64 entries
3. 0x50:Instruction TLB: 4-KByte and 2-MByte or 4-MByte pages, 64 entries
4. 0x01:Instruction TLB: 4K-Byte Pages, 4-way set associative, 32 entries
5. 0x7A:2nd-level cache: 256KB, 8-way set associative, sectored, 64 byte line size
6. 0x70:Trace cache: 12K-μop, 8-way set associative
CPU字串索引 (Brand Index)详解:
0x0: CPU不支持Brand Index
0x1: Celeron CPU
0x2: Pentium 3
0x3: Pentium 3 Xeon
0x4-0x7: 未用
0x8: Pentium 4
可惜我是用AMD CPU的,有好些功能都不能亲自试验
参考资料:IA-32 Intel Architecture Software Developer’s Manual